Description
The KRISS Sling Mount for GEN II 2017 Vector is a must-have accessory for those looking to enhance the versatility of their KRISS Vector. The ambidextrous sling mount provides a sturdy and reliable mounting point for your sling, ensuring comfort and convenience while handling your firearm.
Installation of the KRISS Sling Mount is easy and straightforward, requiring the loosening of the castle nut on the buffer tube, careful loosening of the two 1.5mm set screws, and the unthreading of the buffer tube from the upper housing. Once these steps are completed, the sling mount can be placed onto the threaded end of the buffer tube, and the buffer tube can be reinstalled. Careful tightening of the two set screws is required, and overtightening should be avoided. Finally, the castle nut can be tightened to secure the sling mount and buffer tube.
Upgrade your KRISS Vector with the KRISS Sling Mount for GEN II 2017 Vector and experience enhanced versatility and convenience while handling your firearm.
-
Loosen the castle nut* on the buffer tube.
-
Carefully loosen the two 1.5mm set screws.
-
Unthread buffer tube from upper housing.
-
Place sling mount onto threaded end of buffer tube.
-
Reinstall buffer tube.
-
Carefully tighten the two set screws. Do not overtighten.
-
Tighten castle nut to secure sling mount and buffer tube.
*Castle nut not included.
