KRISS PARTS

  • KRISS Extension Kit for Glock Magazine ALP KRISS Extension Kit for Glock Magazine ALP

    KRISS Extension Kit for Glock Magazine ALP

    The KRISS Mag-Ex Kit 2 is the capacity extending base plate for your standard Glock magazines. The KRISS Mag-Ex Kit 2 is constructed of durable and lightweight reinforced composites and made up of the extended baseplate, outer sleeve and extended spring...
    CHF 49.00
    Add to Cart
  • KRISS Extension Kit for Glock Magazine FDE KRISS Extension Kit for Glock Magazine FDE

    KRISS Extension Kit for Glock Magazine FDE

    The KRISS Mag-Ex Kit 2 is the capacity extending base plate for your standard Glock magazines. The KRISS Mag-Ex Kit 2 is constructed of durable and lightweight reinforced composites and made up of the extended baseplate, outer sleeve and extended spring...
    CHF 49.00
    Add to Cart
  • KRISS DMK 22 Magazine 25 rds KRISS DMK 22 Magazine 25 rds

    KRISS DMK 22 Magazine 25 rds

    This is the factory KRISS DMK22 25RDS Magazine. With this magazine your DMK22 will hold the bolt open after the last round is fired, allowing you to reload the same way you would with your AR-15.
    CHF 44.00
    Add to Cart
  • KRISS KV22 Magazine 30 rds ALP KRISS KV22 Magazine 30 rds ALP

    KRISS KV22 Magazine 30 rds ALP

    To customize your gun, now this 22LR 30 round magazine comes in white! Holds 30 rounds of .22 long rifle rimfire ammunition. This magazine is only for use with the Vector 22. We do not guarantee fit nor function with any other firearm.
    CHF 39.00
    Add to Cart
  • Vector Angled Grip for Picatinny Rail Vector Angled Grip for Picatinny Rail

    KRISS Vector Angled Grip for Picatinny Rail

    The KRISS Angled Grip will add a gentle contour to the front of your Vector lower receiver.  This attachment will provide a secure location to grip the Vector with the support hand and also provide some separation from the controls to help prevent...
    CHF 23.00
    Add to Cart
  • KRISS KV22 Magazine 30 rds KRISS KV22 Magazine 30 rds

    KRISS KV22 Magazine 30 rds

    Holds 30 rounds of .22 long rifle rimfire ammunition. This magazine is only for use with the Vector 22. We do not guarantee fit nor function with any other firearm.
    CHF 36.00
    Add to Cart
  • GLOCK G20 Magazine

    GLOCK G20 Magazine

    This is a factory original Glock G20 magazine that will hold 15 rounds of 10mm Auto for your G20 or your 10mm KRISS Vector.
    CHF 50.00
    Add to Cart
  • KRISS DS150 Stock / Mil-Spec / PINK KRISS DS150 Stock / Mil-Spec / PINK

    KRISS DS150 Stock / Mil-Spec / PINK

    The KRISS DS150 Stock fits AR milspec buffer tubes. Sockets capable of accepting a QD sling mount can be found on the left and right side of the stock and a removable rubber shock pad is preinstalled. Buffer tube not included. Cerakote® finished in...
    CHF 65.00
    Add to Cart
  • KCI Drum Magazine for Glock KCI Drum Magazine for Glock

    KCI Drum Magazine for Glock

    Featuring all-black, glass-filled polymer construction with hardened steel inserts, these 50 round Glock drum magazines work with all double-stack 9mm Glock pistols (Gen 3 or later) and compatible carbines like the Kel-Tec Sub 2000 and AR-15s chambered...
    CHF 179.00
    Add to Cart
  • KRISS Vector GEN II 2017 Upper / FDE KRISS Vector GEN II 2017 Upper / FDE

    KRISS Vector GEN II 2017 Upper / FDE

    Complete upper receiver assembly for KRISS Vector GEN II, not compatible with GEN I.The KRISS Vector GEN II Semi-Auto Upper Assembly is made from advanced polymer composites, then coated with Cerekote® Ceramic Firearms Coating. This is a one piece...
    CHF 359.00
    Pre-Order Now
  • KRISS Vector GEN II 2017 Upper / ALP KRISS Vector GEN II 2017 Upper / ALP

    KRISS Vector GEN II 2017 Upper / ALP

    Complete upper receiver assembly for KRISS Vector GEN II, not compatible with GEN I.The KRISS Vector GEN II Semi-Auto Upper Assembly is made from advanced polymer composites, then coated with Cerekote® Ceramic Firearms Coating. This is a one piece...
    CHF 359.00
    Pre-Order Now
  • KRISS Vector GEN II  2017 Upper / BLK KRISS Vector GEN II  2017 Upper / BLK

    KRISS Vector GEN II 2017 Upper / BLK

    Complete upper receiver assembly for KRISS Vector GEN II, not compatible with GEN I.The KRISS Vector GEN II Semi-Auto Upper Assembly is made from advanced polymer composites. This is a one piece upper receiver, complete with a semi automatic fire control...
    CHF 319.00
    Pre-Order Now
  • KRISS Vector Ejection Port

    KRISS Vector Ejection Port

    This is the OEM ejection port for your Vector.  The ejection port for the 9X19 and .40S&W is aluminum. The ejection port for the .45 ACP and 10MM KRISS Vector is polymer. We highly recommend pairing the proper ejection port material with the...
    CHF 13.00
    Choose Options
  • KRISS Vector Flash Hider

    KRISS Vector Flash Hider

    The KRISS Vector Flash hider helps reduce the flash signature of the muzzle. Designed to fit the KRISS Vector SBR, SDP or SMG variants, but will work on other firearms with matching thread pitch.   DIMENSIONS   Overall Length 1.9" / 50mm ...
    CHF 115.00
    Choose Options
  • KRISS Ambidextrous Folding Stock Adapter for GEN II 2017 Upper KRISS Ambidextrous Folding Stock Adapter for GEN II 2017 Upper

    KRISS Folding Stock Adaptor

    The KRISS Vector Ambidextrous Folding Stock Adapter for GEN II 2017 is constructed of hard coat anodized aluminum and steel and allows for the attachment of AR-15 type buffer or pistol arm brace tubes. The adaptor can be configured to fold to either the...
    CHF 145.00
    Add to Cart
  • KRISS Mag-Ex Extended Glock Magazine

    KRISS Mag-Ex Extended Glock Magazine

    The KRISS Mag-Ex extended magazine is a fully assembled Mag-Ex Kit with a factory standard Glock Magazine. The Mag-Ex is the perfect match of reliable feeding, toughness, and aesthetics for the KRISS Vector. The Mag-Ex is available in 45ACP for 25 rounds...
    CHF 79.00
    Add to Cart
  • KRISS Extension Kit for Glock Magazine KRISS Extension Kit for Glock Magazine

    KRISS Extension Kit for Glock Magazine

    The KRISS Mag-Ex Kit 2 is the capacity extending base plate for your standard Glock magazines. The KRISS Mag-Ex Kit 2 is constructed of durable and lightweight reinforced composites and made up of the extended baseplate, outer sleeve and extended spring...
    CHF 39.00
    Choose Options
  • KRISS Picatinny Rail Cover Long KRISS Picatinny Rail Cover Long

    KRISS Picatinny Rail Cover Long

    Made from lightweight aerospace grade aluminum, the KRISS Picatinny Rail Cover protects your hand from the sharp edges of the Picatinny rail. The Long rail cover will cover the Vector receiver's integrated bottom rail in its entirety, or 3 5/16" (85mm).
    CHF 44.00
    Add to Cart
  • KRISS Picatinny Rail Cover Short KRISS Picatinny Rail Cover Short

    KRISS Picatinny Rail Cover Short

    Made from lightweight aerospace grade aluminum, the Kriss Picatinny Rail Cover protects your hand from the sharp edges of the Picatinny rail while leaving room for the KRISS Picatinny Hand stop. Short Rail Cover measures 2 7/16" (62mm) in length. The...
    CHF 38.00
    Add to Cart
  • KRISS Vector Bolt Assembly KRISS Vector Bolt Assembly

    KRISS Vector Bolt Assembly

    This is the KRISS Vector bolt assembly and is compatible with all KRISS Vector Generation I and Generation II firearms, including the SDP, CRB, SBR, and SMG. Please Note:.40S&W, and 10MM Bolt Assembly utilize the same components. Select 10MM from...
    CHF 199.00
    Pre-Order Now
  • KRISS Vector Bolt Lock Mounting Block

    KRISS Vector Bolt Lock Mounting Block

    Replacement KRISS Vector Bolt Lock Assembly for GEN I and GEN II Vector platform. Note: If your Vector has a spacer plate underneath the existing Bolt Lock Assembly, please reuse this spacer. Includes assembled bolt lock assembly and four screws.
    CHF 29.00
    Add to Cart
  • KRISS Vector Bolt Rebuild Kit

    KRISS Vector Bolt Rebuild Kit

    The KRISS Vector Bolt Rebuild Kit contains everything you need to keep your Vector's bolt operating like new and includes the following components: Firing Pin Firing Pin Spring Firing Pin Retention Pin Extractor Extractor Spring Extractor Retention Pin ...
    CHF 39.00
    Choose Options
  • KRISS Vector Charging Handle Spring Kit

    KRISS Vector Charging Handle Spring Kit

    The Charging Handle Spring Kit includes replacement parts for the KRISS Vector GEN I or GEN II platform charging handle. Parts Included: Charging Handle Spring Charging Handle Slider Spring Charging Handle Slider Spring Anchor Charging Handle Slider...
    CHF 10.00
    Add to Cart
  • KRISS Vector CRB Square Shroud / 16"

    KRISS Vector CRB Square Shroud / 16"

    Change the profile of your KRISS Vector CRB with the 16" Enhanced Barrel Shroud. It is designed to fit both the GEN I and GEN II KRISS Vector CRB models for all calibers. This is the newer, square profile barrel shroud, introduced shortly after the Gen 2...
    CHF 129.00
    Pre-Order Now
  • KRISS Vector CRB Round Shroud / 16" KRISS Vector CRB Round Shroud / 16"

    KRISS Vector CRB Round Shroud / 16"

    Replacement OEM KRISS Vector CRB 16" round shroud. Designed for the KRISS Vector CRB with 16" barrel. This is the original round-profile barrel shroud. Compatible with all generation and all caliber Vector CRB models. Pairs well with the Vector Mk9 and...
    CHF 129.00
    Pre-Order Now
  • KRISS Vector Extractor Kit

    KRISS Vector Extractor Kit

    Replacement KRISS Vector extractor and spring for Generation I or Generation II Vector platforms. Fits all Vector models. Parts included: Extractor Extractor Pin Extractor Spring Please Note:.40S&W, and 10MM Extractor Kit utilize same components...
    CHF 10.00
    Choose Options
  • KRISS Vector Fire Control Group / Semi

    KRISS Vector Fire Control Group / Semi

    The KRISS Vector GEN II fire control group features a pivoting, single stage trigger with a trigger pull weight of 5.5 lbs. This semi-automatic fire control group is not compatible with the Vector GEN I. Not compatible with the KRISS Vector SMG.
    CHF 229.00
    Pre-Order Now
  • KRISS Vector Folding Stock for Hinged Receiver KRISS Vector Folding Stock for Hinged Receiver

    KRISS Vector Folding Stock for Hinged Receiver

    The redesigned hinged KRISS Vector Folding Stock is compatible with both the GEN I and GEN II KRISS Vector (pre-2017) bodies and now features a metal sling loop below the body. The folding stock aids with the storage and transport of your KRISS Vector by...
    CHF 109.00
    Add to Cart
  • KRISS Vector Mag Catch Kit

    KRISS Vector Mag Catch Kit

    Replacement magazine catch kit for the KRISS Vector. Fits all Vector models of all generations. Includes everything needed to refresh/replace the Vector's magazine catch. Parts included: Magazine catch Magazine catch spring Magazine catch button...
    CHF 19.00
    Pre-Order Now
  • KRISS Vector MK1 Modular Rail / ALP

    KRISS Vector MK1 Modular Rail / ALP

    The KRISS Vector MK1 Modular Rail is designed as bolt on hand guard extension for your KRISS Vector CRB, and is made from aluminum alloy and coated with Cerakote® Ceramic Firearms Coating. The rail's shape follows the form factory of the KRISS...
    CHF 219.00
    Add to Cart
  • KRISS Vector MK1 Modular Rail / BLK KRISS Vector MK1 Modular Rail / BLK

    KRISS Vector MK1 Modular Rail / BLK

    The KRISS Vector MK1 Modular Rail is designed as bolt on hand guard extension for your KRISS Vector CRB, and is made from aluminum alloy. The rail's shape follows the form factory of the KRISS Vector's body and is milled to reduce weight while still...
    CHF 179.00
    Add to Cart
  • KRISS Vector MK1 Modular Rail / CGR

    KRISS Vector MK1 Modular Rail / CGR

    The KRISS Vector MK1 Modular Rail is designed as bolt on hand guard extension for your KRISS Vector CRB, and is made from aluminum alloy and coated with Cerakote® Ceramic Firearms Coating. The rail's shape follows the form factory of the KRISS...
    CHF 219.00
    Pre-Order Now
  • KRISS Vector MK1 Modular Rail / FDE

    KRISS Vector MK1 Modular Rail / FDE

    The KRISS Vector MK1 Modular Rail is designed as bolt on hand guard extension for your KRISS Vector CRB, and is made from aluminum alloy and coated with Cerakote® Ceramic Firearms Coating. The rail's shape follows the form factory of the KRISS...
    CHF 219.00
    Add to Cart
  • KRISS Vector MK1 Modular Rail / ODG

    KRISS Vector MK1 Modular Rail / ODG

    The KRISS Vector MK1 Modular Rail is designed as bolt on hand guard extension for your KRISS Vector CRB, and is made from aluminum alloy and coated with Cerakote® Ceramic Firearms Coating. The rail's shape follows the form factory of the KRISS...
    CHF 219.00
    Pre-Order Now
  • KRISS Vector Picatinny Rail Section

    KRISS Vector Picatinny Rail Section

    7-Slot Picatinny Side Rail Accessory Kit for the KRISS Vector. Allows you to mount your favorite Picatinny-compatible accessories to your KRISS Vector Attaches to provided hard points on the Vector receiver, or the Mk1, Mk9, and Mk11 Vector handguards...
    CHF 35.00
    Add to Cart
  • KRISS Vector Push Pin Kit / 2 Pack

    KRISS Vector Push Pin Kit / 2 Pack

    KRISS Vector Body Push Pins for all Generation I or Generation II Vector series. Sold by the pair (2x push pins). Four pins total are used to secure the Vector receiver and upper assembly together. One pin is used with the Gen 1 and Gen 2 Vector's hinge...
    CHF 28.00
    Add to Cart
  • KRISS Vector Screws Pack

    KRISS Vector Screws Pack

    Set of replacement screws and pin for the KRISS Vector Gen I and Gen II platforms, including the SDP, CRB, and SBR. Screws Included: 11x Fire Control Group Mounting Screws 2x Vector Safety Selector Screws 4x Bolt Lock Mounting Screws 2x Vector Rail...
    CHF 24.00
    Add to Cart